> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zayo.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Cloud Router connection to Oracle FastConnect

When attached to a Cloud Router, your Oracle FastConnect connection can share a routing domain with other cloud links and virtual circuits. With a Cloud Router connection, BGP and IP addressing are negotiated automatically between Oracle and DynamicLink.

If you want to run BGP on your own equipment instead, use a [Cloud Link to Oracle FastConnect](https://docs.zayo.com/cloud-links-oracle.md).

## Prerequisites

Before you begin, ensure you have:

* An active Oracle Cloud account with permissions to manage FastConnect and networking resources
* A Virtual Cloud Network (VCN) in your Oracle Cloud tenancy
* A Dynamic Routing Gateway (DRG) attached to your VCN, with a route rule in the VCN route table that sends traffic to the DRG. For more information, see [Oracle - Dynamic Routing Gateways](https://docs.oracle.com/en-us/iaas/Content/Network/Tasks/managingDRGs.htm)
* A DynamicLink [Cloud Router](cloud-router)

## Step 1: Create a FastConnect virtual circuit in Oracle Cloud

1. Log in to the Oracle Cloud Console.
2. Open the navigation menu and select **Networking > Customer connectivity > FastConnect**.
3. Click **Create FastConnect**.
4. For **Connection type**, select **FastConnect partner**.
5. For **Redundancy level**, choose whether to create a single virtual circuit or redundant virtual circuits, and then click **Next**.
6. Complete the following fields:

| Field | Description |
| - | - |
| **Virtual circuit name** | A name for this connection. |
| **Partner** | Select **Zayo**. |
| **Virtual circuit type** | Select **Private virtual circuit**. |
| **Traffic** | Select **All traffic**. |
| **Dynamic routing gateway** | Select the DRG attached to your VCN. |
| **Provisioned bandwidth** | Select the bandwidth for this connection. |

7. Choose the Layer 3 option, so that BGP and IP addressing are negotiated automatically between Oracle and DynamicLink. Keep IPv6 addressing off.
8. For **MTU**, we recommend **9000** (jumbo frames).
9. Click **Create**.

After Oracle creates the virtual circuit, copy the **OCID** of each virtual circuit. You'll need it to create the connection in DynamicLink.

## Step 2: Create the Cloud Router connection in DynamicLink

Once you have your OCID from Oracle Cloud, return to the DynamicLink portal.

Navigate to **Build Your Network > Ports** in the DynamicLink portal.

Under **Connections**, click the **Cloud Router** vertical tab.

Select **Cloud Connection** and then Oracle.

Complete the following fields:

| Field | Description |
| - | - |
| **Virtual Circuit OCID** | Enter the OCID you copied from the Oracle Cloud Console. |
| **BW** | This is filled in automatically from the OCID details. |

Enter a name for the connection and then click **Add**.

If you created redundant virtual circuits, repeat this step with the second OCID.

## Step 3: Verify the connection

Return to the Oracle Cloud Console and open your FastConnect connection. The status changes to **Provisioning**, and then to **Provisioned** after a few minutes.

Return to the Cloud Routers page in DynamicLink and verify your connection appears as **Available**.

## Next steps (routing)

Because BGP is negotiated automatically, you don't need to configure a BGP neighbor for Oracle. To control which routes are exchanged, see [Configure BGP for a Cloud Router](cloud-router-bgp).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.