> ## Documentation Index
> Fetch the complete documentation index at: https://docs.zayo.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Virtual Meet-Me Room

> Securely connect directly to another DynamicLink tenant without a physical cross-connect.

A Virtual Meet-Me Room (also called a "Private Meet-Me Room") lets two DynamicLink tenants securely connect directly to each other. Traditional meet-me rooms require a physical cross-connect at a neutral location, which can be expensive and take weeks to provision. With a Virtual Meet-Me Room, you configure the connection on your existing DynamicLink Port, and it's ready in minutes.

The tenant that starts the connection (the **initiator**) creates a secure key and shares it with the other tenant (the **receiver**). The receiver redeems the key to complete the connection.

## Connection types

| Type | Description |
| - | - |
| **Direct (Ethernet)** | Both tenants choose a Port from their own inventory and define the VLAN to use. DynamicLink creates an EVPL between the two Ports and VLANs. |
| **Ethernet to Cloud Router** | The initiator lets the receiver connect to the initiator's Cloud Router with a Port and VLAN of the receiver's choice. The initiator defines the IP and routing information. |

> [!NOTE]
>
> Meet-Me connections are secured by default. A firewall rule makes sure only explicitly allowed traffic passes through the connection. To allow traffic, see [Firewall](https://docs.zayo.com/docs/firewall.md).

## Prerequisites

Before you create a Meet-Me connection, make sure that:

* Both tenants have a provisioned DynamicLink Port with available bandwidth
* You know which VLANs are available on your Port
* For an Ethernet to Cloud Router connection, the initiator has a [Cloud Router](https://docs.zayo.com/docs/cloud-router.md) and a free IP range of `/31` or larger
* You have a secure, separate channel (such as encrypted email or a secure messaging app) to share the key with the other tenant

## Create a direct (Ethernet) connection

Both tenants follow these steps. The initiator creates a key, and the receiver redeems it.

1. Navigate to **Build Your Network > Ports**. Click **Add a Connection** in the upper right or click **Add connection** next to the Port you're using.
2. Under **"A" Port**, complete the following fields. The "A" Port is your local end of the connection.

| Field | Description |
| - | - |
| **Port** | Select a Port with available bandwidth. |
| **VLAN** | If trunking is enabled on the Port, select a VLAN ID, or select **Native** for untagged traffic. |
| **BW** | Select the maximum bandwidth for this connection. |

3. Under **"Z" Port**, select **Meet-Me**.
4. Choose one of the following:
   * **If you're the initiator**, select **Create a Key**. DynamicLink generates a cryptographically secured key. Copy the key and send it to the other tenant over a separate, secure channel.
   * **If you're the receiver**, select **Redeem a Key** and enter the key you received from the initiator.
5. Enter a name for the connection and then click **Add**.

## Create an Ethernet to Cloud Router connection

In this connection type, the initiator offers access to their Cloud Router, and the receiver connects to it with their own Port and VLAN.

### Initiator: Create the key

1. Navigate to **Build Your Network > Ports**.
2. Under **Connections**, click the **Cloud Router** vertical tab and then click **Add a Connection**.
3. Select **Meet-Me**.
4. Complete the following fields:

| Field | Description |
| - | - |
| **BW** | Select the maximum bandwidth for this connection. |
| **IP Address** | The gateway IP for this connection on your Cloud Router. Choose a free range of `/31` or larger. |

5. Select **Create a Key**. DynamicLink generates a cryptographically secured key. Copy the key and send it to the other tenant over a separate, secure channel.
6. Enter a name for the connection and then click **Add**.

### Receiver: Redeem the key

1. Navigate to **Build Your Network > Ports**. Click **Add a Connection** in the upper right or click **Add connection** next to the Port you're using.
2. Under **"A" Port**, select your Port, VLAN, and bandwidth.
3. Under **"Z" Port**, select **Meet-Me** and then select **Redeem a Key**.
4. Enter the key you received from the initiator.
5. Enter a name for the connection and then click **Add**.

## Best practices

* **Share keys securely**: Treat the key like a password. Send it over a separate channel from any other connection details, and only to the tenant you intend to connect with.
* **Use descriptive names**: Include the other party and location in the connection name (for example, "PartnerCo-NYC-DC1") so both tenants can identify the connection easily.
* **Allow only the traffic you need**: Because Meet-Me connections block traffic by default, add firewall rules only for the specific traffic you expect between the two tenants.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.