Skip to main content

Release highlights

  • Virtual Meet-Me Room — Securely connect directly to another DynamicLink tenant in minutes, without a physical cross-connect.
  • Marketplace — Offer network-based services on your Ports to other tenants through the new public Meet-Me marketplace.
  • Oracle connections — Connect to Oracle Cloud over L2 or L3 with FastConnect.
  • Threat Intelligence — Spot threats sooner with a new Threat Intelligence feed built into your observability data.
  • Intelligent Observability — The rebuilt Observability search bar helps you investigate faster, with smarter suggestions and one-click drill-down.
  • DashAI — DashAI can now manage BGP configuration, check reachability and connectivity, decode packet captures, and connect to Azure ExpressRoute.
Breaking changes in this release: Login now happens in two steps, and the API and MCP paths have changed. If you have automation or integrations, see Breaking Changes before upgrading.

Breaking Changes

Review these before upgrading — some require you to update automation or integrations.

Login and authentication

  • Login now happens in two steps. You’ll enter your tenant name on one screen, then your username and password on a second screen. For example, whereas before you may have entered bob@companyname as your login name, you will now enter companyname as the tenant in the first step, and bob as your username in the second step.
  • The OAuth login method changed. If you have automation that calls the API, update it to use the new authentication method — scripts using the old method will fail without changes.

API and MCP

  • API paths have moved. APIs are now available at /api/v1/. The previous /broker/ path will keep working until version 2.17, after which it will be retired. New functionality will only be available at the new path.
  • The MCP path changed from /broker/mcp/ to /mcp/.

Routing

  • Blackhole static routes need to be recreated. If you use blackhole static routes — for example, for BGP RTBH communities on your internet VRF — these are removed during the upgrade and need to be recreated afterward with the new blackhole target.

New Features

Connectivity

You can now securely connect two tenants directly in a Virtual Meet-Me Room. The initiator of the connection provides a secure token to the second party. Supported connection types:
  • EVPL — Both sides choose a Port from their inventory and define the VLAN to use. DynamicLink creates an EVPL between the two Ports and VLANs.
  • Ethernet to Cloud Router — The initiator lets the second party connect to their Cloud Router instance with a Port and VLAN of their choice, and defines the IP and routing information.
The connection is secured by default — a firewall rule ensures only explicitly allowed traffic passes through.
You can now offer network-based services on your Ports to other tenants in an automated marketplace — making it easier to connect with regional or niche CSPs, GPUaaS operators, SaaS providers, other NaaS operators, and more.Once marketplace is enabled for your account, you can control:
  • The services you create, including icon, description, and Ports from your inventory
  • VLAN ranges
  • Bandwidth available
  • Connected customers
You can now create L2 and L3 connections to Oracle Cloud using FastConnect. After you create a FastConnect virtual circuit in the Oracle Cloud Console, add the connection from the Build Your Network screen by choosing a Cloud or Customer Port and VLAN on the A side, selecting Oracle as the cloud provider on the Z side, and entering the Virtual Circuit OCID. Bandwidth is filled in automatically from the OCID details.
DynamicLink now supports up to 5x oversubscription on port connections. To enable this feature, you must submit a request to Zayo support.Note that if traffic exceeds port capacity, random drop behavior can occur.

Insights

You now have access to the DynamicLink Threat Intelligence feed, which enriches your insights data across Network insights, DNS monitoring, and Applications reporting.

Administration

You can now create Partners in DynamicLink that create and manage their own tenants. This supports use cases such as:
  • Letting a business unit manage its own customers (e.g., Managed Services)
  • Wholesale partners managing their own customers
  • Customers who need multiple tenants for their own internal business and networking needs

Feature Updates

Portal

You can now filter the Connections screen and the Build Your Network screen by type — Cloud Operator, Meet-Me, Marketplace, DC, DIA, and more — for quicker navigation when you have many active connections.

Internet (DIA)

When you create a DIA BGP connection manually, you can now use a BGP-enabled subnet of any size, instead of relying on automatic IP assignment.
You can now turn asymmetric routing on or off for an existing DIA BGP connection, without recreating it. Use asymmetric routing when you have multiple uplinks using the same ASN.
Turning on asymmetric routing turns off DIA Firewall enforcement, DDoS protection, and network insights for that link.
You can now run Looking Glass tests, including packet capture, on your DIA (Dedicated Internet Access) connections. Select DIA in Looking Glass to run Route Lookup, Ping, Traceroute, Path MTU, or Packet Capture against a DIA connection.

Insights

The Observability search bar was rebuilt to help you investigate faster:
  • Type anything — The search bar auto-detects what you’ve entered and reshapes the page around it: IP address, CIDR range, hostname/FQDN, destination port, ASN, country, or firewall rule.
  • Smart search suggestions — The list narrows live as you type, with recent searches remembered per tenant.
  • Four investigation tabs:
    • Overview — KPIs, top sources/destinations, top hostnames, firewall and NAT hits at a glance.
    • Network Observability — six donut tiles covering source/destination IPs, ports, protocols, ASNs, countries, and firewall rules, with a Client/Server traffic toggle.
    • Application Observability — FQDN ALLOW/DENY split, hostname distribution, AS Name breakdown, firewall × FQDN cross-table, Is-DIA indicators, source/destination IPs.
    • DNS — query-type distribution, top DNS sources, top DNS servers, top hostnames, and a suspicious-name heuristic table based on entropy and length analysis.
  • Identity card — A persistent side panel shows public/private classification, ASN, country, Is-DIA, first-seen/last-seen timestamps, and event volume.
  • No blank screens — When a tab has no data in your selected window, Search checks nine other time windows (5 minutes to 7 days) and recommends the right one with a one-click chip.
  • One-click context — Every tile has an “Open” link straight to the corresponding dashboard, with the entity already filtered.
  • Investigate with DashAI — A page-level button hands the entity and current findings to DashAI. Per-row “connectivity check” buttons launch focused diagnostics on top sources/destinations.
Domains and IP addresses across observability tools are now matched against categories:
  • Domains — content categories, including cyber-related categories like phishing and malware.
  • IPs — enriched with GeoIP, the services they provide (e.g., Office 365, Zoom, Public DNS, AI platforms), and cyber categories.
You’ll see these categories throughout the observability panels.

Services

You’ll see the following improvements to Firewall and DIA Firewall reporting:
  • A new statistics layout that’s easier to navigate and filter
  • A filter to show only Allow, Block, or Web filtering rules
  • A “last changed” column showing when a rule was last updated

AI & Integrations

DashAI can now:
  • Manage your BGP tenant configuration — Set up a connection to a remote network over BGP, which is especially useful for connecting to major cloud providers.
  • Check reachability — Find out whether a remote IP is reachable.
  • Check connectivity — Debug why a connection can’t be established between two IPs, across OSI layers 1–4.
  • Connect to Azure ExpressRoute — This is in addition to AWS and GCP, already supported.
  • Decode packet captures — Trigger a packet capture on a connection and get a plain-language explanation of the result, on its own or as part of a connectivity check.
Authentication was updated to support:
  • Connecting to MCP from more LLM services, including OpenAI
  • Longer sessions, thanks to secure auto-renewal of auth tokens
  • Broader identity provider (IDP) integration going forward
Because of this change, you’ll now enter your tenant name on one screen, then your username and password on a second screen. If you have automation that authenticates to the API, see Breaking Changes.

Bug Fixes

  • Port interfaces were displaying the wrong title.
  • Enabling or disabling users for a tenant didn’t always work.
  • NAT services sometimes stayed marked as active after being removed.
  • Exporting dynamic routes to CSV produced an empty file.
  • Creating a static route to a non-existent gateway showed an incorrect error message.
  • Password requirements weren’t shown when creating a new user during tenant setup.
  • Custom bandwidth couldn’t be set for Cloud NNI connections.
  • A customer port wasn’t shown as down when the underlying network connection went down.
  • NAT statistics were sometimes incorrect in traffic reports.
  • The BGP hard/soft reset option had no effect.
  • AWS connections created an extra port even when reusing the same key.
  • The reset password screen displayed the wrong notification text.
  • The Cloud NNI list sometimes timed out while loading.
  • Deleting a DIA connection didn’t always remove it from the network.
  • Some connections experienced brief, intermittent interface flapping.