Skip to main content
Oracle Cloud Infrastructure (OCI) FastConnect provides a private, dedicated connection between your network and Oracle Cloud, bypassing the public internet. A Cloud Link to Oracle FastConnect creates a Layer 2 (Ethernet) connection from your DynamicLink port to your Oracle virtual circuit. With a Layer 2 connection, you configure BGP directly between your own equipment and Oracle. If you want DynamicLink to handle routing instead, use a Cloud Router connection. See Layer 2 vs. Layer 3 to help you decide.

Prerequisites

Before creating an Oracle FastConnect connection, ensure you have:
  • An active Oracle Cloud account with permissions to manage FastConnect and networking resources.
  • A Virtual Cloud Network (VCN) in your Oracle Cloud tenancy.
  • A Dynamic Routing Gateway (DRG) attached to your VCN, with a route rule in the VCN route table that sends traffic to the DRG. For more information, see Oracle - Dynamic Routing Gateways.
  • A DynamicLink port with available bandwidth.
  • Network equipment on your side that supports BGP.

Step 1: Create a FastConnect virtual circuit in Oracle Cloud

  1. Log in to the Oracle Cloud Console.
  2. Open the navigation menu and select Networking > Customer connectivity > FastConnect.
  3. Click Create FastConnect.
  4. For Connection type, select FastConnect partner.
  5. For Redundancy level, choose whether to create a single virtual circuit or redundant virtual circuits, and then click Next.
For production workloads, create redundant virtual circuits on separate DynamicLink ports. See Oracle - FastConnect Redundancy Best Practices.
  1. Complete the following fields:
  1. Scroll down to the BGP parameters and complete the following fields:
  1. If you chose redundant virtual circuits, complete the same fields for the second virtual circuit.
  2. Click Create.
After Oracle creates the virtual circuit, its status is Pending Partner. Copy the OCID of each virtual circuit. You’ll need it to create the connection in DynamicLink. Once you have your OCID from Oracle Cloud, return to the DynamicLink portal. Navigate to Build Your Network > Ports. Click Add a Connection in the upper right or click Add connection next to the port you are using. Complete the following fields: “A” Port Select Customer Port and then complete the following fields: “Z” Port Select Cloud Connection and then select Oracle. Complete the following fields: Enter a connection name and then click Add. If you created redundant virtual circuits, repeat this step with the second OCID, and select a different port for redundancy.

Step 3: Verify the connection and configure BGP

Return to the Oracle Cloud Console and open your FastConnect connection. The status changes to Provisioning, and then to Provisioned after a few minutes. Once the connection is provisioned, configure BGP on your equipment using the customer BGP IP address, Oracle BGP IP address, ASN, and MD5 key (if used) from Step 1. Oracle’s BGP ASN is 31898 for most commercial regions. When the BGP session is established, the BGP state in the Oracle Cloud Console changes to Up. For troubleshooting, see Oracle - FastConnect Troubleshooting.