Skip to main content
When attached to a Cloud Router, your Oracle FastConnect connection can share a routing domain with other cloud links and virtual circuits. With a Cloud Router connection, BGP and IP addressing are negotiated automatically between Oracle and DynamicLink. If you want to run BGP on your own equipment instead, use a Cloud Link to Oracle FastConnect.

Prerequisites

Before you begin, ensure you have:
  • An active Oracle Cloud account with permissions to manage FastConnect and networking resources
  • A Virtual Cloud Network (VCN) in your Oracle Cloud tenancy
  • A Dynamic Routing Gateway (DRG) attached to your VCN, with a route rule in the VCN route table that sends traffic to the DRG. For more information, see Oracle - Dynamic Routing Gateways
  • A DynamicLink Cloud Router

Step 1: Create a FastConnect virtual circuit in Oracle Cloud

  1. Log in to the Oracle Cloud Console.
  2. Open the navigation menu and select Networking > Customer connectivity > FastConnect.
  3. Click Create FastConnect.
  4. For Connection type, select FastConnect partner.
  5. For Redundancy level, choose whether to create a single virtual circuit or redundant virtual circuits, and then click Next.
  6. Complete the following fields:
  1. Choose the Layer 3 option, so that BGP and IP addressing are negotiated automatically between Oracle and DynamicLink. Keep IPv6 addressing off.
  2. For MTU, we recommend 9000 (jumbo frames).
  3. Click Create.
After Oracle creates the virtual circuit, copy the OCID of each virtual circuit. You’ll need it to create the connection in DynamicLink. Once you have your OCID from Oracle Cloud, return to the DynamicLink portal. Navigate to Build Your Network > Ports in the DynamicLink portal. Under Connections, click the Cloud Router vertical tab. Select Cloud Connection and then Oracle. Complete the following fields: Enter a name for the connection and then click Add. If you created redundant virtual circuits, repeat this step with the second OCID.

Step 3: Verify the connection

Return to the Oracle Cloud Console and open your FastConnect connection. The status changes to Provisioning, and then to Provisioned after a few minutes. Return to the Cloud Routers page in DynamicLink and verify your connection appears as Available.

Next steps (routing)

Because BGP is negotiated automatically, you don’t need to configure a BGP neighbor for Oracle. To control which routes are exchanged, see Configure BGP for a Cloud Router.