Connection types
Meet-Me connections are secured by default. A firewall rule makes sure only explicitly allowed traffic passes through the connection. To allow traffic, see Firewall.
Prerequisites
Before you create a Meet-Me connection, make sure that:- Both tenants have a provisioned DynamicLink Port with available bandwidth
- You know which VLANs are available on your Port
- For an Ethernet to Cloud Router connection, the initiator has a Cloud Router and a free IP range of
/31or larger - You have a secure, separate channel (such as encrypted email or a secure messaging app) to share the key with the other tenant
Create a direct (Ethernet) connection
Both tenants follow these steps. The initiator creates a key, and the receiver redeems it.- Navigate to Build Your Network > Ports. Click Add a Connection in the upper right or click Add connection next to the Port you’re using.
- Under “A” Port, complete the following fields. The “A” Port is your local end of the connection.
- Under “Z” Port, select Meet-Me.
- Choose one of the following:
- If you’re the initiator, select Create a Key. DynamicLink generates a cryptographically secured key. Copy the key and send it to the other tenant over a separate, secure channel.
- If you’re the receiver, select Redeem a Key and enter the key you received from the initiator.
- Enter a name for the connection and then click Add.
Create an Ethernet to Cloud Router connection
In this connection type, the initiator offers access to their Cloud Router, and the receiver connects to it with their own Port and VLAN.Initiator: Create the key
- Navigate to Build Your Network > Ports.
- Under Connections, click the Cloud Router vertical tab and then click Add a Connection.
- Select Meet-Me.
- Complete the following fields:
- Select Create a Key. DynamicLink generates a cryptographically secured key. Copy the key and send it to the other tenant over a separate, secure channel.
- Enter a name for the connection and then click Add.
Receiver: Redeem the key
- Navigate to Build Your Network > Ports. Click Add a Connection in the upper right or click Add connection next to the Port you’re using.
- Under “A” Port, select your Port, VLAN, and bandwidth.
- Under “Z” Port, select Meet-Me and then select Redeem a Key.
- Enter the key you received from the initiator.
- Enter a name for the connection and then click Add.
Best practices
- Share keys securely: Treat the key like a password. Send it over a separate channel from any other connection details, and only to the tenant you intend to connect with.
- Use descriptive names: Include the other party and location in the connection name (for example, “PartnerCo-NYC-DC1”) so both tenants can identify the connection easily.
- Allow only the traffic you need: Because Meet-Me connections block traffic by default, add firewall rules only for the specific traffic you expect between the two tenants.